Front Brakes

I haven't posted in a while, but I've still been working on the Jeep. About a month or so ago I took on the front brake pads and rotors. It was a little more involved than I thought. To get the rotor off you have to take the entire hub off which meant taking all the bearings out. While I was in there I repacked the bearings. Below are pics. The old pads and rotors were in very bad shape as you can see.

Old Rotor and bearings

All the pieces after unassembly

Old rotors, pads and grease seal

The old pads had worn deep ruts into the rotors

New rotor and pads